|
Mar 28, 2010 7:23 pm finally came up with the plans for my front Bumper, There
gonna be fabricated out of 3/16 diamond plate
4/18/2010
just cut the major pieces to width, need to make my template for shape & cut them to length, clean every thing up a bit then
weld her up
4/25/2010
All cut up,, just need a new 1/2 inch drill bit so i can drill out the mounting holes. & weld it up
here's a shot all staged
5/9/2010
Welded up the bulk of it between yesterday & today, just need to cut & weld the end caps, fill in some holidays Finnish grinding
than make the stinger.
6/5/2010
DONE
|
